Oce VarioPrint 2090 Function Manual page 87

How to staple a landscape oriented document
Follow the steps 1-3 from the previous paragraph.
1
You can use only 1 staple for a landscape oriented document.
Note:
Select the 'Layout' section.
2
Set the 'Original document type' setting to landscape.
3
Set the 'Copy document type' setting to landscape. This setting allows you to
4
describe the orientation and binding edge of the copy.
If you change the settings, the left part of the operator panel shows the
Note:
result of these changes.
Define the required settings in the other 3 sections ('Basic', 'Paper' and 'Extra')
5
(see 'Types of copy job settings' on page 72).
Enter the number of copies.
6
Press the start key
7
Copy jobs
.
83