Oce VarioPrint 2090 Function Manual page 89

The automatic document feeder
Use the automatic document feeder to copy a set of originals. You can put a
maximum of 50 originals into the automatic document feeder. This number
refers to originals of 80 g/m
The originals must have the same size.
■
The originals must not be smaller than 127 x 203 mm.
■
The originals must not be larger than 297 x 432 mm.
■
The weight of the originals can be between 60 and 170 g/m
■
For the four items above it is necessary that the size is one of the supported
standard formats if you use the automatic document feeder.
When to do
Use the procedure below for example to do the following.
Print a document with many pages.
■
Print the appendices of a document on coloured paper.
■
Insert blank pages into a document.
■
Before you begin
Divide your documents into subsets. Arrange the different subsets in the
required order. For example, you can put a subset on red paper to act as a front
or back cover. When the processing method changes, a new subset begins. You
must scan each subset separately with the set-build key
How to prepare your originals
Jog the subset of originals carefully to make a straight stack.
1
Put the stack face down and in the readable form into the automatic document
2
feeder.
If necessary, adjust the original guides.
3
Press the function key 'Copy'.
4
Define the settings for the original and the copy in the four sections on the
5
operator panel ('Basic', 'Paper', 'Layout', 'Extra').
Copy jobs
2
, size A4.
2
.
.
85