Illustration
[12] Edit a mailbox job
[12] Edit a mailbox job
How to edit a mailbox job
Open the mailbox to access your print job (see 'Print a job from the mailbox'
1
on page 37).
Press the function key 'Edit'. The job editor opens with the settings of the initial
2
mailbox job.
Press the function key above the display and select the 'Basic' section (only
3
necessary if the section is not already displayed by default after you press
'Edit').
[13] Basic section
[13] Basic section
Press the function key below the operator panel to set the following settings.
■
'Print job identification' Indicates the file name and the user name. You
■
can not change this information for a print job.
'Print' Indicates if the original is 1-sided or 2-sided.
■
'Staple' Allows you to set the number of staples, 0, 1 or 2 staples for the
■
print job.
40
Océ VarioPrint 2090 Job manual