Oce VarioPrint 2090 Function Manual page 28

Low power mode
When the printer is in low power mode, the power consumption is decreased
to a lower level. The screen displays a screen saver. The system needs a couple
of minutes to return to the stand-by mode.
The system turns into the low power mode when the system is not used for a
defined time. The low power mode timer settings indicate this time. The low
power mode timer can be set in KOS. See Set the EPA timers
The system returns from the low power mode in the following situations.
The Océ VarioPrint 2090 must be active to print a document. The system
■
automatically returns to the 'Printer warming up' status (the system will not
return to warming up when the job is forced to the mailbox or when the job
queue is set to stop in KOS).
Press any key on the operator panel.
■
24 Océ VarioPrint 2090 Job manual