Oce VarioPrint 2090 Function Manual page 84

Select the 'Layout' section.
5
Set the 'Original document type' to vertical or horizontal. This setting describes
6
how the information is mapped on the original.
[41] Layout settings
[41] Layout settings
Select the 'Orientation' setting in the 'Extra' section. This setting describes how
7
the original is put on the glass plate.
[42] Extra settings
[42] Extra settings
This setting is greyed out if you use the automatic document feeder.
Note:
Press the start key
8
80 Océ VarioPrint 2090 Job manual
to send the copy job to the job queue.