Illustration
[8] Restart the Océ Smart Imager
[8] Restart the Océ Smart Imager
How to restart the Océ Smart Imager
Select 'System' in the title bar of the Océ VarioPrint 2090 Settings Editor.
1
Select 'Restart Océ Smart Imager'.
2
Click 'OK' to restart the Océ Smart Imager.
3
The system waits until all active jobs are finished .
Note:
Go to the Océ VarioPrint 2090 .
4
Read the message on the screen and press the key for 'OK'.
5
The Océ Smart Imager restarts. The system goes into sleep mode.
Press the On/Off button
6
The LED in the On/Off button changes from amber to green.
7
32
Océ VarioPrint 2090 Job manual
.