Oce VarioPrint 2090 Function Manual page 77

[34] Graphical feedback
[34] Graphical feedback
Settings on the Basic section
[10] The settings on the Basic section
Settings
'Original' This setting describes if the originals must be scanned 1-sided or
'Copy'
'Staple'
'Zoom'
[10] The settings on the Basic section
[35] Basic section
[35] Basic section
The settings of the 'Basic' section for a copy job are not the same as the
Note:
settings of the 'Basic' section for a print job. The 'Basic' section for a print job
has less options. (see 'Edit a mailbox job' on page 39)
Copy jobs
Description
2-sided
This setting describes if the copies must be 1-sided or 2-sided
This setting allows you to set the number of staples. you can set
0, 1 or 2 staples.
The position of 1 staple depends on the selected original
Note:
document type (landscape stapling possible).
This setting has 2 options
'Automatic'. This function resizes the information on the
■
original to fit on a copy with a different paper size. The
automatic function uses fixed conversion values.
Manual setting. The zoom range is between 25% and 400%.
■
73