Press the function key above the display and select the 'Paper' section.
4
[14] Paper section
[14] Paper section
Press the function key below the operator panel to set the following setting.
■
'Paper' Allows you to select the paper tray for the print job.
■
Press the function key above the display and select the 'Layout' section.
5
[15] Layout section
[15] Layout section
Press the function key below the operator panel to set the following settings.
■
'Original document type' Indicates how the information is oriented on the
■
original, in landscape or portrait direction. You can not change this setting
for a print job.
'Print document type' Allows you to set the binding edge of the print. This
■
setting defines if the document flips over the long edge or the short edge of
a sheet. This setting also allows you to select the orientation of the print.
You can select landscape or portrait. For documents that flip over the short
edge of a sheet you can only set 1 staple.
Print jobs (mailbox)
41