Oce VarioPrint 2090 Function Manual page 33

How to shut down the Océ VarioPrint 2090
Press
1
Press 'Shut down' to start the shut down procedure.
2
Select 'Yes' to confirm the procedure or 'No' to stop the procedure.
3
The Smart Imager will start shutting down (the LED onon the right-hand side
4
of the operator panel changes from green to red).
A message is displayed that instructs you to wait until the LED on the
5
right-hand side of the operator panel is off before you press the power switch
.
Read the message and press the key for 'OK' to continue the shut down
6
procedure.
- The LED in the On/Off button changes from green to amber.
- The screen of the operator panel goes off.
- The LED next to the
Press the power switch
7
How to put the Océ VarioPrint 2090 into sleep mode
Press the On/Off button
1
the button changes from green to amber,
or
If the system processes a job, the system stops printing after all the jobs
Note:
in the job queue are completed and then goes into sleep mode.
Get started
to open the 'System manager' on the operator panel.
goes off.
.
. The system switches to sleep mode. The LED in
29