Settings on the Layout section
[12] The settings on the Layout section
Settings
'Original
document
type'
'Copy
document
type'
[12] The settings on the Layout section
[37] Layout section
[37] Layout section
Copy jobs
Description
This setting allows you to indicate how the information is
displayed on the original. A figure of the left-hand side on the
operator panel presents the display of the information.
There are 4 options (use the scroll buttons to access the 2
topmost options, the values Portrait, book or Landscape,
book are displayed as standard.).
Landscape, book
■
Portrait, book
■
Landscape, calendar
■
Portrait, calendar
■
You can only change this setting for a copy job. The value
Note:
is fixed for a print job.
This setting allows you to select the binding edge of the copies.
A figure on the left-hand side of the operator panel displays the
result after you choose a value for a particular binding edge.
There are four options.
The portrait copy turns on the long edge.
■
The landscape copy turns on the short edge.
■
The portrait copy turns on the short edge.
■
The landscape copy turns on the long edge.
■
It can occur that the original document type and the copy
Note:
document type that you select, have a different content
orientation. For example, the original is a portrait document
and the copy is a landscape document. When this situation
occurs, the system resizes the information on the portrait
original to fit on the landscape copy.
75