Oce VarioPrint 2090 Function Manual page 83

Before you begin
Open the cover of the scan station.
1
Put the original face down, in horizontal or vertical orientation on the glass
2
plate (in readable form).
Put the original in the upper left corner on the glass plate.
Note:
When you use the glass plate, you must use the set-build key
Note:
2-sided copies.
How to scan special originals from the glass plate
Press the function key 'Copy'.
1
[39] Copy job
[39] Copy job
Select the 'Basic' section with the function key above the operator panel display
2
(in case this section is not already opened by default).
Select the 'Zoom' percentage box.
3
[40] Zoom setting
[40] Zoom setting
Use the arrow keys on the right-hand side of the operator panel display to select
4
the required zoom factor.
(see table 14)
Note:
Copy jobs
to make
79