Detailed Shutter Settings - Sony SRW-9000 Operation Manual

Detailed Shutter
Settings
When you turn this unit's Electronic Shutter
function on, you can control the shutter by
selecting either shutter angles or shutter speeds
(seconds).
You can use the subdisplay for normal shutter
switching, and make more detailed settings on the
<SHUTTER> page of the Camera >USER
(PAINT) menu. The menu allows you to set the
shutter on a page that displays the shutter angle
(degrees), the shutter speed (seconds), and the
shutter mode.
<SHUTTER> page
SHUTTER
To activate the electronic shutter, set this to ON.
The [deg] field displays the currently selected
shutter angle, and the [sec] field displays the
speed (in seconds), converted according to the
current frame rate.
STEP (Step mode)
To select a step shutter value, move the cursor to
this line.
Turn the MENU SEL/ENTER dial to display
registered shutter values in the [deg] and in [sec]
fields.
CONTINUOUS (Continuous mode)
To fine-adjust the selected shutter step value or
use a value that has not been registered as a
shutter step value, move the cursor to this line.
The values in the [deg] and [sec] columns change
continuously when the MENU SEL/ENTER dial
is turned.
STEP ASSIGN
You can add and delete shutter step values in the
same way as with the <SHUTTER ASSIGN>
page (see page 132) of the Camera >USER
(OPERATION) menu.
ADD: After a Continuous mode operation to
specify a shutter value in the [deg] field, you
can use ADD to register that value as a new
shutter step. If eight shutter step values have
been already registered, "STEPS FULL"
appears, and the new value is not registered.
In that case, use DELETE to delete an
unneeded shutter step value and try again.
DELETE: Deletes the shutter step value
displayed in the [deg] field by a step
operation.
See "Shutter Settings" (page 42) for more
information about shutter step values.
FRAME RATE
When the optional HKSR-9002 is installed, select
the frame rate (number of frames to shoot), for
when Select FPS is selected as the video format.
You can select from the ranges in the following
table.
Selected format Selectable frame rates
(number of frames to
shoot)
S23.98PsF/S24PsF 1 to 24 FPS (1 to 24 frames)
S25PsF 1 to 25 FPS (1 to 25 frames)
S29.97PsF/S30PsF 1 to 30 FPS (1 to 30 frames)
S50P 1 to 50 FPS (1 to 50 frames)
S59.94P/S60P 1 to 60 FPS (1 to 60 frames)
Note
When you have selected a format other than Select FPS,
the frame rate is displayed in parentheses and cannot be
changed.
COMP MODE
When the optional HKSR-9002 is installed, you
can compensate for changes in the video level
when the frame rate (number of frames to shoot)
is changed. There are two compensation modes,
which use either the shutter angle or electrical
gain.
ANGLE (angle compensation mode): When the
frame rate is changed, the video level is held
constant by automatically adjusting the
shutter angle.
Notes
• In angle compensation mode, the frame rate
cannot be changed to a low value when the angle
approaches 0°, and the frame rate cannot be
changed to a high value when the angle
approaches 360°.

Detailed Shutter Settings

71