Main Operation; Battery/P2Card - Panasonic AJ-SPX900e Operating Instructions Manual

8-6 MAIN OPERATION

8-6-1 BATTERY/P2CARD

Items/ Adjustable
Data Saved Range
BATTERY PRO14 Select the battery to use. Remaining
SELECT TRIM14 capacity detection is also performed
according to the selected battery.
HYTRN50
The selectable battery types change
HYTRN100
depending on the settings under [8-6-2
HYTRN120
BATTERY SETTING1] and [8-6-3 BATTERY
DIONIC90
SETTING2].
DIONIC160
HP-90L
BP-H120
NP-L50
ENDURA50
ENDURA80
BP-L60/90
NiCd14
NiCd13
NiCd12
TYPE A
TYPE B
– C U F –
EXT DC IN AC_ADPT Set the remaining capacity detection type
when a battery is connected to the DC IN
SELECT PRO14
connector. Remaining capacity detection is
TRIM14
also performed according to the selected
HYTRN50
battery type.
HYTRN100
The selectable battery types change
HYTRN120
depending on the settings under [8-6-2
DIONIC90
BATTERY SETTING1] and [8-6-3 BATTERY
DIONIC160
SETTING2].
HP-90L
<Note>
BP-H120
The % display is disabled even when a
NP-L50
digital battery is connected to the DC IN
ENDURA50
connector.
ENDURA80
BP-L60/90
NiCd14
NiCd13
NiCd12
TYPE A
TYPE B
– C U F –
BATT NEAR ON Select whether or not to set the alarm to
beep for BATT NEAR END ALARM.
END ALARM OFF
– C U F –
BATT NEAR ON If set to ON, the warning tone and indication
can be canceled by pressing the MODE
END CANCEL OFF
CHECK button when BATT NEAR END
ALARM is triggered.
– C U F –
BATT END ON Select whether or not to set the alarm to
beep for BATT END ALARM.
ALARM OFF
– C U F –
BATT REMAIN 100% Set the display content of the remaining
battery capacity indicator bars in the display
FULL 70%
window when using a digital battery.
100%: Indicate FULL at 100% capacity.
70%: Indicate FULL at 70% capacity.
– C U F –
116
Remarks
Items/ Adjustable
Data Saved Range
CARD NEAR ON Select whether or not to set the alarm to
beep for P2 CARD NEAR END ALARM.
END ALARM OFF
– C U F –
CARD NEAR 3min Set the remaining time to indicate the P2
CARD NEAR END TIME alarm.
END TIME 2min
– C U F –
CARD END ON Select whether or not to set the alarm to
ALARM OFF beep for P2 CARD END ALARM.
– C U F –
CARD REMAIN/ 5min/ Set the length of time for one segment ( ) of
the P2 card's remaining capacity indicator
3min/
bars.
5min/ :One segment represents 5 minutes.
3min/ :One segment represents 3 minutes.
– C U F –
The ____ in the Adjustable Range column indicates the preset
mode.
Remarks