Panasonic AJ-SPX900e Operating Instructions Manual page 60

4
To format the SD memory card, turn the JOG dial button to
move the cursor to YES. Then, press the dial button.
When the SD memory card has been formatted, the
following message appears:
The card will not be formatted if the following message appears
when the JOG dial button is pressed:
Error message
CONFIG NG
NO CARD
(No SD memory card inserted.)
CONFIG NG
ERROR
(SD memory card cannot be
formatted.)
CONFIG NG
WRITE PROTECT
(SD memory card is write-
protected.)
CONFIG NG
CANNOT ACCCESS
(SD memory card not accessible).
5
To exit the menu, press the MENU button.
The settings menu disappears and the status of the AJ-
SPX900E is indicated at the top and bottom of the
viewfinder screen.
<Note>
If an SD memory card is inserted or removed with the <SD
CARD READ/WRITE> screen open, the data title cannot
be edited.
Move the cursor to the option TITLE READ and press the
JOG dial button.
Edit the data title.
60
Remedy
Insert an SD memory card.
The card may be defective.
Replace the card.
Remove the card and cancel the
protect.
Example: The SD memory card is
not accessible because it is being
played back.
After the operation in process,
format the card.
To write set data on an SD memory card
1
Navigate the menu to the <SD CARD READ/WRITE>
screen.
To select a file number
2
Turn the JOG dial button to move the cursor to the option
[W. SELECT]. Then, press the dial button.
3
Turn the JOG dial button to select a desired number (1 - 8).
Then, press the dial button.
To give the selected file a title
4
Turn the JOG dial button to move the cursor to the option
[TITLE:].
5
Press the JOG dial button. This moves the cursor to the
entry area, putting the AJ-SPX900E in entry mode.