Warning System; Warning Description Tables - Panasonic AJ-SPX900e Operating Instructions Manual

7-3 Warning System

7-3-1 Warning Description Tables

If a problem is detected immediately after the power is turned on, or during operation, this will be indicated by the WARNING lamp,
lamps inside the viewfinder and a warning tone.
<Note>
The WARNING lamp has the highest priority, followed by the tally lamp, and then the warning tone. When multiple errors occur
simultaneously a higher priority indication will be triggered. The [WIRELESS RF], however, may not be indicated, depending on the
menu setting.
1. System Errors
Display window
The error code lights up.
indication
WARNING lamp Blinks 4 times per second.
Tally lamp Blinks 4 times per second.
The SYSTEM ERROR indication and the error
Viewfinder
code light up.
Warning tone Beeps continuously.
Warning An error in the reference signal or the
description communication.
Recording/
The operation stops.
playback operation
Please confirm [7-3-2 Error Codes] and consult
Countermeasures
your nearest service centre.
2. Card removal error
Display window
Error code E-30 appears.
indication
WARNING lamp Blinks 4 times per second.
Tally lamp Blinks 4 times per second.
Viewfinder The "TURN POWER OFF" indicator blinks.
Warning tone Continues to beep.
The P2 card being accessed has been removed,
Warning
resulting in an error in the internal memory of the
description
camera-recorder.
Recording/
Cannot be performed.
playback operation
Turn off the power to the camera-recorder. If
Countermeasures there is an error in a clip on the removed P2 card,
repair the clip.
96
3. Battery Empty
Display window All 7 bar indicators for battery remaining capacity
indication start blinking.
WARNING lamp Lights up.
Tally lamp Blinks once per second.
Viewfinder The BATT LED lights up.
Warning tone Beeps continuously.
Warning
The battery has run out.
description
Recording/
The operation stops.
playback operation
Countermeasures Replace the battery.
4. Write-protect
Display window All 7 bar indicators for remaining MEDIA capacity
indication start blinking.
Continues to light up until an operation is
WARNING lamp
performed.
Continues to blink 4 times per second until an
Tally lamp
operation is performed.
Viewfinder The WP indicator blinks.
Continues
Warning tone
performed.
Warning
The inserted P2 cards are write-protected.
description
Recording/
Recording is disabled.
playback operation
Countermeasures Disable the write-protect or replace the P2 card.
to beep until an operation is