Tc/Ub; Umid Set/Info - Panasonic AJ-SPX900e Operating Instructions Manual

8-6-6 TC/UB

Items/ Adjustable
Data Saved Range
UB MODE USER Select the user bits mode.
TIME USER:Select UB value set in the LCD
DATE
TIME: Select local time (hours, minutes,
EXT
TCG
DATE: Select local date and time (2 last
FRM RATE
REGEN
EXT: When "CAM" or "VIDEO" is selected
TCG: TCG value enters UB.
FRM RATE:
REGEN:Read out value stored in the card
– C U F –
VITC UB MODE USER/EXT Select the user bits mode for VAUX TC
(VITC).
TIME
USER/EXT:
DATE
TCG
FRM RATE
REGEN
TIME: Select local time (hours, minutes,
DATE: Select local date and time (2 last
TCG: TCG value enters UB.
FRM RATE:
REGEN:Read out value stored in card and
– C U F –
TCG SET HOLD ON ON/OFF switching for the feature that
always starts recording (when the power is
OFF
turned ON again) the TCG value that was
set before the power is turned OFF.
– C U F –
FIRST REC TC REGEN For the first recording after the power is
turned on, a P2 card is inserted and then
PRESET
switching from this P2 card to another
recording-target P2 card is performed,
select whether or not to regenerate the time
code as the value on the new P2 card.
REGEN:For clips recorded on the recording-
PRESET:
Use the camera-recorder's internal time
code.
<Note>
Set the date and time accurately. For
guidance on setting, see [4-5-2 Setting the
Internal Clock's Date and Time].
– C U F –
120
Remarks
section.
seconds).
digits of year, month, date, time).
in the menu option REC SIGNAL in
the SYSTEM MODE screen, user's
bit input to the TC IN connector is the
reference.
When "1394" is selected, user's bit
input to the DVCPRO/DV connector
is the reference.
If reading fails, USER value is
retained.
Select same camera shoting
information (frame rate, etc.) with the
VAUX UB (VITC UB).
and record value continuously.
If UB MODE is set to EXT, the EXT
value is recorded. If not, USER value
set by UB is recorded.
seconds).
digits of year, month, date, time).
Select same camera shoting
information (frame rate, etc.) with the
VAUX UB (VITC UB).
record value continuously.
target P2 card, regenerate the time
code as the time code of the clip that
has the most recent date and time.
Items/ Adjustable
Data Saved Range
P.OFF LCD ON Select whether or not to display the time
code setting and counter indication on the
DISPLAY OFF
LCD monitor when the power is turned OFF.
ON: Display setting and indication while the
OFF: Power-down LCD monitor while
– C U F –
TC OUT TCG Select the time code to be output to the time
TCG/TCR code output connector.
TCG: Always output time code generator
TCG/TCR:
– C U F –

8-6-7 UMID SET/INFO

Items/ Adjustable
Data Saved Range
COUNTRY NO-INFO Input the user's country. NO-INFO is
displayed until the input completes.
– C U F –
ORGANIZATION NO-INFO Input the user's organisation or company
name. NO-INFO is displayed until the input
completes.
– C U F –
USER NO-INFO Input the user name. NO-INFO is displayed
until the input completes.
– C U F –
DEVICE NODE Indicate the product ID number.
– – – – –
<Note>
Please refer to [4-5-6 Setting UMID Information] for the UMID
information setting.
The ____ in the Adjustable Range column indicates the preset
mode.
Remarks
power is turned OFF.
camera power is turned OFF. Setting
and indication disabled.
value.
Display time code generator value in
E-E mode, and time code reader
value in V-V mode.
Remarks