Output Sel - Panasonic AJ-SPX900e Operating Instructions Manual

Items/ Adjustable
Data Saved Range
VOICE MEMO ON Set the available memory space for voice
memos in P2 cards.
RESERV OFF
ON: Reserve a voice memo area of 10
OFF: Do not reserve any voice memo
<Note>
Even when this item is set to OFF, and FULL
is displayed for the P2 card's recording
capacity, it may be possible to record voice
memos depending on the status of the P2
card.
– C U F –
REC START ALL Select operating modes that allow recording
to start.
NORMAL
ALL: Allow recording to start during stop,
NORMAL:
Allow recording to start during stop and
recording pause.
<Note>
When the INTERVAL REC MODE is set to
either "ON" or "ONE SHOT", the "ALL"
setting for this option switches to "NORMAL"
– C U F –
operation.
P.ON REC HOLD Select the recording order of the slot when
the power is turned on.
SLOT SEL SLOT1
HOLD:
The recording order starts with the card
previously selected when the power was
turned off.
SLOT1:
The recording order starts with the card
that is inserted in Slot 1 when the power
– C U F –
is turned on.
102
Remarks
minutes or longer separately from the
video recording capacity. The voice
memo area can be used even when
FULL is displayed for the recording
capacity of the P2 card.
space.
recording pause, and playback.

8-2-5 OUTPUT SEL

Items/ Adjustable
Data Saved Range
VIDEO OUT VBS Select the output signal on the VIDEO OUT
SEL VF terminal.
VBS:Output a regular composite signal.
Y
VF: Output a VF Y signal. The status
SDI
Y:
SDI: Output an SDI signal. Only selectable
– C U F –
OUTPUT CHAR TC Set the character contents superimposed
onto the output signals for the VIDEO OUT
STATUS
terminal (Analog or SDI) and MON OUT
MENU
terminal.
ONLY
TC: Display the time code. (Displays the
<Note>
The TC display position moves up and down
depending on the camera ID position.
STATUS:
Display the same characters
superimposed on the VF signal. (Displays
the menu when menu characters are
superimposed.)
MENU ONLY:
Displays only when the menu characters
are superimposed. No display appears
when other characters are superimposed.
– C U F –
MONITOR OUT ON Select whether or not to superimpose
characters on the MON OUT terminal signal
CHAR OFF
independently of the camera's VIDEO OUT
CHARACTER switch. (The character
content is the same as the video output
signal.)
ON: Enable superimpose.
OFF: Disable superimpose.
– C U F –
LCD MON ON Select whether or not to superimpose
characters on the LCD monitor. (The
CHAR OFF
character content is the same as the video
output signal.)
ON: Enable superimpose.
OFF: Disable superimpose.
– C U F –
VF MODE EE/PB Select the image to display in the viewfinder.
EE/PB: Display the playback image in the
EE
EE:
– C U F –
THUMBNAIL ON Select whether or not to output clip
thumbnails displayed on the LCD monitor to
OUT OFF
the video output and monitor output signals.
ON: Enable output.
OFF: Disable output.
– C U F –
The ____ in the Adjustable Range column indicates the preset
mode.
Remarks
display is also superimposed.
Output a component Y signal.
when the optional AJ-YA902AG
extension board is attached.
menu when menu characters are
superimposed.)
(Not interlocked with the VIDEO OUT
CHARACTER switch.)
(Not interlocked with the VIDEO OUT
CHARACTER switch.)
playback mode.
Always display the camera image.