Panasonic AJ-SPX900e Operating Instructions Manual page 61

6
Turn the JOG dial button until a desired character appears.
The characters that appear are switched in the following
order:
Space:
Alphabetical characters:
Numerals:
Symbols:
7
Press the JOG dial button to accept a desired character.
8
Turn the JOG dial button to move the cursor to the next digit
(clockwise), and repeat Steps
eight characters).
To write data on a selected file
9
When the title is set, turn the JOG dial button to move the
cursor to [:].
10
Press the JOG dial button to return the cursor to the option
[TITLE:].
11
Turn the JOG dial button to move the cursor to the option
[WRITE].
12
Press the JOG dial button to display the following message:
A to Z
0 to 9
', >, <, /, -
6 7
- to set characters (up to
The data will not be written if any of the following messages
appears when the JOG dial button is pressed:
Error message
WRITE NG
NO CARD
(No SD memory card inserted.)
WRITE NG
FORMAT ERROR
(SD memory card not properly
formatted.)
WRITE NG
ERROR
(SD memory card not writable.)
WRITE NG
WRITE PROTECT
(SD memory card write-protected.)
WRITE NG
CANNOT ACCCESS
(SD memory card not accessible).
WRITENG
CARD FULL
(SD memory card has no free
space.)
13
Turn the JOG dial button to move the cursor to YES. Then,
press the dial button.
When the data has been written, the following message
appears:
14
To exit the menu, press the MENU button.
The settings menu disappears and the status of the AJ-
SPX900E is indicated at the top and bottom of the
viewfinder screen.
Remedy
Insert an SD memory card.
The card has not been formatted
using the AJ-SPX900E.
Replace the card.
The card may be defective.
Replace the card.
Remove the card and disable the
protect.
Example: The SD memory card is
not accessible because it is being
played back.
After the operation in process,
format the card.
The card is not writable because it
has no free space. Delete
unwanted files or replace the card
with a new one.
61
4