Resetting Menu Option Settings To Defaults; Lens File Data - Panasonic AJ-SPX900e Operating Instructions Manual

To title settings data for scene files
1
Navigate the menu to the <SCENE> screen.
2
Turn the JOG dial button to move the cursor to the option
[TITLEs 1 - 4] for the appropriate scene file.
3
Press the JOG dial button to move the cursor to the title
entry area, putting the AJ-SPX900E in entry mode.
4
Turn the JOG dial button until a desired character appears.
The characters that appear are switched in the following
order:
Space:
Alphabetical characters:
Numerals:
Symbols:
5
Press the JOG dial button to accept a desired character.
6
Turn the JOG dial button to move the cursor to the next digit
(clockwise), and repeat Steps
eight characters).
7
When the title is set, turn the JOG dial button to move the
cursor to [:].
8
Press the JOG dial button to return the cursor to the options
TITLEs 1 - 4.
9
Turn the JOG dial button to return the cursor to the option
WRITE.
66
A to Z
0 to 9
', >, <, /, -
4 5
- to set characters (up to
10
Press the JOG dial button to display the following message:
11
Turn the JOG dial button to move the cursor to YES. Then,
press the dial button.
This writes the title into the scene file area of the AJ-
SPX900E internal memory.
12
To exit the menu, press the MENU button.
4-10-5 Resetting Menu Option Settings to
Defaults
The menu settings can be reset to their defaults.
To reset the settings to their defaults, select the menu option
READ FACTORY DATA in the <INITIALIZE> screen, which is
accessible from the FILE page.
All settings will be reset to their defaults.
<Note>
This operation does not delete the scene file, lens file, and the
information stored as the user data.

4-10-6 Lens File Data

The AJ-SPX900E is capable of correcting the lens white
shading. This lens white shading correction may be stored as
lens file data (maximum number of data sets is eight). Lens file
data allows you to quickly perform a proper white shading
adjustment, even when the lens is replaced.
For more information on reading/writing data, see [5-3 Mounting
the lens and Performing the Flange Back and White Shading
Adjustments].