Panasonic AJ-SPX900e Operating Instructions Manual page 62

To read data on an SD memory card
1
Turn the JOG dial button to move the cursor to the option
[SD CARD READ/WRITE]. Then, press the dial button.
To select a file number
2
Turn the JOG dial button to move the cursor to the menu
option [R. SELECT]. Then, press the dial button.
3
Turn the JOG dial button to select a desired number (1 - 8).
Then, press the dial button.
To read data on a selected file
4
Turn the JOG dial button to move the cursor to the option
[READ].
5
Press the JOG dial button to display the following message:
62
6
Turn the JOG dial button to move the cursor to YES. Then,
press the dial button.
When the data has been read, the following message
appears:
The data will not be read if any of the following messages
appears when the JOG dial button is pressed:
Error message
READ NG
NO CARD
(No SD memory card inserted.)
READ NG
FORMAT ERROR
(SD memory card not properly
formatted.)
READ NG
NO FILE
(No file found.)
READ NG
ERROR
(SD memory card not readable.)
READ NG
CANNOT ACCCESS
(SD memory card not accessible).
7
To exit the menu, press the MENU button.
The settings menu will be replaced by status indications for
the AJ-SPX900E.
Remedy
Insert an SD memory card.
The card has not been formatted
using the AJ-SPX900E.
Replace the card.
Write file data.
Only data written with the AJ-
SPX900E is readable.
Example: The SD memory card is
not accessible because it is being
played back.
After the operation in process,
read data.