Table of Contents
Advertisement
MAIN OPERATION
BATTERY/P2CARD
Items/
Adjustable
Data Saved
Range
BATTERY
PROPAC14
Select the battery to use. Remaining
SELECT
TRIMPAC14
capacity detection is also performed
according to the selected battery.
HYTRON50
The variable range is changed by the
HYTRON140
item settings selected on the [ BATTERY
DIONIC90
SETTING1 ] (page 184) and [ BATTERY
DIONIC160
SETTING2 ] (page 185) menus.
NP-L7
The initial value for TYPE A is set to
ENDURA7
DIONIC90 while the same for TYPE B is
ENDURA10
set to HYTRON140.
ENDURA-D
When BP-GL65 or BP-GL95, a battery
PAG L95
made of Sony, is used, set this to "BP-
BP-L65/95
L65/95".
NICD14
TYPE A
TYPE B
– C U F –
EXT DC IN
AC_ADPT
Set the remaining capacity detection
type when a battery is connected to the
SELECT
PROPAC14
DC IN connector. Remaining capacity
TRIMPAC14
detection is also performed according to
HYTRON50
the selected battery type.
HYTRON140
The variable range is changed by the
DIONIC90
item settings selected on the [ BATTERY
DIONIC160
SETTING1 ] (page 184) and [ BATTERY
NP-L7
SETTING2 ] (page 185) menus.
ENDURA7
Analog voltage is displayed on the
ENDURA10
viewfinder screen.
ENDURA-D
When BP-GL65 or BP-GL95, a battery
PAG L95
made of Sony, is used, set this to "BP-
BP-L65/95
L65/95".
NICD14
TYPE A
TYPE B
– C U F –
BATT NEAR
ON
Select whether or not to set the alarm to
END ALARM
OFF
beep for BATT NEAR END ALARM.
– C U F –
BATT NEAR
ON
If set to ON, the warning tone and
OFF
indication can be canceled by pressing
END CANCEL
the MODE CHECK button when BATT
NEAR END ALARM is triggered.
– C U F –
BATT END
ON
Select whether or not to set the alarm to
ALARM
OFF
beep for BATT END ALARM.
– C U F –
BATT REMAIN
70%
Set the display of the remaining battery
100%
level indicator bar in the display window
FULL
when a battery with this function is used.
70%: Indicate FULL at 70% capacity.
100%: Indicate FULL at 100% capacity.
– C U F –
Remarks
Data Saved
CARD NEAR
END ALARM
CARD NEAR
END TIME
CARD END
ALARM
CARD
REMAIN/
The ____ in the Adjustable Range column indicates the
preset mode.
Items/
Adjustable
Range
ON
Select whether or not to set the alarm to
OFF
beep for P2 CARD NEAR END ALARM.
– C U F –
2min
Set the remaining time to indicate the P2
CARD NEAR END TIME alarm.
3min
– C U F –
ON
Select whether or not to set the alarm to
OFF
beep for P2 CARD END ALARM.
– C U F –
3min/
Set the length of time for one segment
5min/
( ) of the P2 card's remaining capacity
indicator bars.
3min/ : One segment represents 3
5min/ : One segment represents 5
– C U F –
Menu : Menu Description Tables
Remarks
minutes.
minutes.
183
Advertisement
Table of Contents
