Error Codes - Panasonic AJ-SPX900e Operating Instructions Manual

9. Battery Nearly Empty
Display window One of the bars in the battery remaining indicator
indication starts blinking.
WARNING lamp Blinks once per second.
Tally lamp Blinks once per second.
Viewfinder The BATT LED blinks.
Warning tone Beeps 4 times per second.
Warning
The battery is about to run out.
description
Recording/
Continues to operate.
playback operation
Countermeasures Replace the battery as required.
10. P2 Card Nearly Full
Display window One of the bars for remaining MEDIA capacity
indication starts blinking.
Blinks
WARNING lamp
continues.
Blinks
Tally lamp
continues.
Viewfinder The P2 card remaining capacity indicator blinks.
Beeps
Warning tone
continues.
Warning The total remaining capacity of all the P2 cards is
description two minutes or less.
Recording/
Continues to operate.
playback operation
Replace the cards. If there is an empty card slot,
Countermeasures
insert a new card.
98
once per second while
once per second while
once per second while

7-3-2 Error Codes

The following error codes are displayed in the display window if
an error occurs in the camera:
Code No.
E-11
E-27
E-30
E-38
E-3F
E-6F
recording
recording
recording
Description
Video initialisation error
Recording control error
P2 card removal error
P2 streaming microcontroller error
Microprocessor error in the camera control circuit.
Reference signal error.