Properties; Clip Property; P2 Card Status Display - Panasonic AJ-SPX900e Operating Instructions Manual

6-17 Properties

The clip's properties and the P2 card's status are displayed.

6-17-1 Clip Property

From the menu bar, select PROPERTY
The following screen appears.
Clip Number
Thumbnail
Slip Information
Displays the number of markers and voice memos attached
to the clip.
The mark appears if the clip is recorded on a write-
protected P2 card.
Slot Number
Clip Information
Displays detailed information about the clip.
START TC:
The time code value at the start of the recording.
START UB:
The user bit value at the start of the recording.
TIME The time at the start of the recording.
DATE: The date of the recording.
DURATION:
The time length of the clip.
CODEC: The recording format of the clip.
Clip Meta Data
Displays more detailed data about the clip. Use the cursor
buttons to move the pointer, and press the SET button to
check the detailed content. The underlined items are
automatically set during shooting. For more information on
displayed metadata, see [6-12 Setting of Clip Meta Data].
90

6-17-2 P2 Card Status Display

From the menu bar, select PROPERTY
following screen appears.
CLIP PROPERTY.
Write-protect Mark
The mark appears if the P2 card is write-protected.
P2 Card Status
The remaining memory capacity of the P2 card is indicated
by a bar graph and percentage.
The following indications may appear, depending on the
card status:
FORMAT ERROR:
An unformatted P2 card is inserted.
NOT SUPPORTED:
An unsupported card is inserted in the camera.
NO CARD:
P2 cards are not inserted.
To check unique information, such as serial number or user
ID, move the cursor to the desired P2 card and press the
SET button.
P2 Card Remaining Capacity/Total Capacity
Displays the P2 card remaining capacity and total capacity
in minutes. The total of the remaining memory capacity for
each P2 card that is displayed may not match the actual
total remaining memory capacity for the P2 cards because
only the figure in minute is displayed.
Slots Total
Displays the total capacity of the 5 slots.
Please note that the remaining capacity of a write-protected
P2 card is not included in the total remaining capacity.
CARD STATUS. The