Lcd Monitor; Genlock - Panasonic AJ-SPX900e Operating Instructions Manual

8-2-6 LCD MONITOR

Items/ Adjustable
Data Saved Range
BRIGHTNESS –7 Adjust the LCD monitor brightness.
:
+0
:
– C U F – +7
COLOR LEVEL –7 Adjust the LCD monitor chroma level.
:
+0
:
– C U F – +7
CONTRAST –7 Adjust the LCD monitor contrast.
:
+0
:
– C U F – +7
BACKLIGHT HIGH Select whether or not to set the LCD monitor
NORMAL brightness to always high.
HIGH:
NORMAL: The brightness changes
– C U F –
SELF SHOOT NORMAL Select whether or not to change the LCD
monitor to mirror image.
MIRROR
NORMAL: Do not change to mirror image.
MIRROR:
– C U F –
ASPECT CONV. LT.BOX Select a screen ratio for images displayed
on the LCD monitor.
SQUEEZE
LT.BOX: Display images in the letter box
SQEEZE: Display images in the squeeze size.
<Note>
This item is enabled only when ASPECT
described in [8-2-1 SYSTEM MODE] is set
– C U F –
to16:9.
Remarks
Set to always high.
according to the BRIGHTNESS
setting.
Change to mirror image.
size.

8-2-7 GENLOCK

Items/ Adjustabl
Data Saved e Range
GENLOCK INT Switch the camera synchronising signal.
EXT INT: Synchronise with the internal reference
signal regardless of the reference
26P EXT
signal input to the GENLOCK IN
terminal.
EXT: Synchronise with the reference signal
input to the GENLOCK IN terminal.
26P EXT:
Synchronizes to the signal input via the
26-pin connector.
– C U F E
H PHASE –50 Perform coarse phase adjustment for
horizontal hold when configuring a system.
COARSE :
+00
:
– – – – – +50
H PHASE FINE –160 Perform fine phase adjustment for horizontal
hold when configuring a system.
:
+000
<Note>
:
This adjustment simultaneously shifts the SC
+160
phase.
– – – – –
SC PHASE 0 Perform coarse SC PHASE adjustment when
GENLOCK is set.
COARSE 1
:
3
– – – – –
SC PHASE –75 Perform fine SC PHASE adjustment when
FINE : GENLOCK is set.
+00
<Note>
:
When adjusting GENLOCK, please adjust H
+75
PHASE first, and then adjust SC PHASE.
– – – – –
The ____ in the Adjustable Range column indicates the preset
mode.
Remarks
103
8