Menu Displays In The Viewfinder Screen; Menu Configuration; Setting Menu Options - Panasonic AJ-SPX900e Operating Instructions Manual

4-6 Menu Displays in the Viewfinder
Screen

4-6-1 Menu Configuration

USER MENU is factory-set. The menu can be
USER MENU:
configured to suit your preferences by specifying
each option according to your purposes and
frequency of use, through the <USER MENU
SELECT> screen, which is accessible from the
MAIN MENU page.
For more information, see [4-6-3 Selecting
Options for USER MENU].
To display USER MENU, press the MENU button.
Allows you to set all options on the settings menu.
MAIN MENU:
This menu has a category-by-category structure,
layered according to purposes and frequency of
use.
To display MAIN MENU, press the MENU button
for three seconds or longer.
Provides options which may be needed if
OPTION MENU:
functions are added in the future.
To display OPTION MENU, hold down the LIGHT
button and press the MENU button.
For more information, contact your local service
center or distributor.
JOG dial button
46
LIGHT button
MENU button

4-6-2 Setting Menu Options

The menu options are set with the MENU and JOG dial buttons.
The menu comprises main menu, sub-menus and options
menus.
The data specified through menu options are written and saved
in the internal memory of the AJ-SPX900E.
This section describes how to set options in MAIN MENU. The
other menus can be configured in the same manner (the method
of displaying the menu screen depends on the particular menu).
<Note>
When the AJ-SPX900E is in thumbnail mode, the viewfinder
displays "THUMBNAIL OPEN", disabling navigation through the
menu.
1
Press the MENU button for three seconds or longer.
The MAIN MENU screen appears, together with its options.
SYSTEM SETTING:
This option is used to specify recording signal,
recording system, etc.
This option is used to fine-adjust images while
PAINT:
monitoring the output waveform of the camera,
using the waveform monitor. Normally, this
adjustment requires assistance from a video
engineer.
This menu option may be set with an external
remote controller, and is useful when using the
AJ-SPX900E without a sound recordist.
Used to select the information items to be
VF:
displayed in the viewfinder screen.
CAM OPERATION:
Used to change settings according to the
conditions for the subject.
MAIN OPERATION:
Used to specify recording-related items, such as
audio settings, time code, battery and P2 card
remaining amounts.
Used to specify file-related items such as SD
FILE:
memory card reading/writing and lens file
settings.
MAINTENANCE:
Used to specify maintenance-related items.
USER MENU SELECT:
Used to edit USER MENU.