Panasonic AJ-SPX900e Operating Instructions Manual page 15

2-4 Shooting and Recording/Playback Functions Section
Shooting and Recording (camera unit)
CC FILTER/ND FILTER (filter selector) controls
Use this knob to select a filter depending on the luminance
and color temperature of the subject.
CC FILTER knob (outside, large diameter)
A: Cross filter
C: 4300 K
ND FILTER knob (inside, small diameter)
1: CLEAR (transparent)
3: 1/16 ND
Examples of filter selection according to shooting conditions
Shooting conditions
Sunrise, sunset, studio
Clear outdoor environments
Cloudy/rainy outdoor
environments
Clear, bright scenes such as
snowscape, high mountains,
beaches, etc.
USER MAIN, USER 1 and USER 2 buttons
These buttons can be assigned user-selected functions,
using a menu option. Each button, when pressed, performs
the assigned function.
For more information, see [4-9-4 Assigning Functions to
USER MAIN, USER1 and USER2 Buttons].
SHUTTER switch
Used to enable or disable the electronic shutter.
OFF: Electronic shutter disabled.
ON: Electronic shutter enabled.
SEL: Used to change the speed of the electronic shutter.
This dial switch returns to its original position. Each turn of
the switch alters the shutter speed.
For more information, see [4-2 Setting the Electronic
Shutter].
B: 3200 K
D: 6300 K
2: 1/4 ND
4: 1/64 ND
CC FILTER ND FILTER
B (3200 K) 1 (CLEAR)
C (4300 K) or 2 (1/4 ND) or
D (6300 K) 3 (1/16 ND)
1 (CLEAR) or
D (6300 K)
2 (1/4 ND)
C (4300 K) or 3 (1/16 ND) or
D (6300 K) 4 (1/64 ND)
!30"
!32"
!31"
AUTO W/B (white/black) BAL switch
AWB: White balance is automatically adjusted.
When the WHITE BAL switch on the side is
positioned at [A] or [B], the adjusted value is stored
in the memory.
However, if "VAR" is selected for the menu options
AWB A and AWB B, the value set through the menu
options is used, and this function does not work.
Menu options can be found in the <WHITE
BALANCE
OPERATION page.
Note also that when the switch is positioned at
PRST this function does not work.
ABB: Back balance is automatically adjusted.
To automatically correct black shading, the AUTO
W/B BAL switch must be pressed toward [ABB] for
longer than five seconds.
<Note>
To stop automatic adjustment of the white or black balance
in progress, set the switch to either ([AWB] or [ABB]).
If automatic adjustment is canceled, the value in effect
before automatic adjustment will be used.
Gain selector switch
Use this switch to select video amplifier gain, according to
lighting conditions under which you are shooting.
The values for L, M, and H can be preset using menu
options.
These are factory-set to 0 dB for L, 9 dB for M, and 18 dB for
H.
MODE> screen on the
2
CAM
15