Panasonic AJ-SPX900e Operating Instructions Manual page 49

Information Item
50i, 25P
Camera Shooting
Mode
EX2
Extender
LOW/MID/HIGH
MODE CHECK
Indication Area
S.GAIN
(STATUS:
DS.GAIN
Master gain,
USER SW GAIN)
(Cause of !LED GAIN (0 dB)
GAIN (–3 dB)
illumination: displayed
DS.GAIN
full-screen)
SHUTTER
Indications selected
WHITE PRE.
through the menu option
EXTENDER
!LED are marked with [ ! ].
BLACK STR.
Indications which may
MATRIX
activate the !LED are
COLOR COR.
marked with [ ].
FILTER
SUPER V
50M/25M/DV
ATW
D.ZOOM
(FUNCTION: SW: MEM/CAM/OFF
SELECT: VBS/VF/Y/SDI
VIDEO OUT)
CHAR: ON/OFF
(FUNCTION: SW: MEM/CAM/OFF
CHAR: ON/OFF
MONI OUT)
(FUNCTION: TOTAL
SLOT1/SLOT2/SLOT3/SLOT4/
P2CARD STATUS)
SLOT5
OP-SLOT
(AUDIO: Enabling or CH1: ON/OFF
disabling the FRONT
CH2: ON/OFF
AUDIO LEVEL control)
(AUDIO: Power status FRONT: ON/OFF
REAR:
for the microphone)
(AUDIO: Input signal FRNT/W.L./REAR
CH1/2/3/4
and level for each
channel)
Indication
Camera shooting mode (progressive or interlaced)
Lens extender used.
Value set for the master gain
–3 to 30 Example: LOW: 0
30/36/42/48 Gain value to which S.GAIN and DS.GAIN are assigned
6 /12 /20
Gain status
Gain status
DS. GAIN value
Shutter status
White balance status
Extender status (EX2 or OFF)
Black stretch status (ON or OFF)
MATRIX status (A, B, or OFF)
Color correction status (ON or OFF)
Filter status
SUPER V status (ON or OFF)
Recording mode (50M, 25M, or DV)
ATW status (ON or OFF)
Digital zoom status (ON or OFF)
Position of OUTPUT SEL switch.
Setting for menu option VIDEO OUT SEL. This option can be found in the
<OUTPUT SEL> screen, which is accessible from the SYSTEM SETTING page.
Position of VIDEO OUT CHARACTER switch
Position of OUTPUT SEL switch.
The setting for menu option MONITOR OUT CHAR. This option can be found in
the <OUTPUT SEL> screen, which is accessible from the SYSTEM SETTING
page.
Total remaining free space/capacities of the P2 cards loaded in P2 Card Slots 1 - 5
Remaining free space/capacity of each card. The numbers denote the P2 card slot
numbers.
The card status is indicated as:
ACTIVE/ACTIVE!/ACCESSING/INFO READING/FULL/PROTECTED/
NOT SUPPORTED/FORMAT ERROR/NO CARD/PROXY
For details of statuses, see [P2 CARD ACCESS LED and status of P2 cards] (page
24).
Indicates optional slot status.
The card status is indicated as:
PROXY/NO CARD/NOT SUPPORTED
If the FRONT AUDIO LEVEL control is in effect for Channel 1, then ON is
indicated. If not, OFF is indicated.
If the FRONT AUDIO LEVEL control is in effect for Channel 2, then ON is
indicated. If not, OFF is indicated.
Power status of the front microphone
ON/OFF Power status of the rear microphone
For more information, see [8-6-5 MIC/AUDIO2].
Input signal and level for each channel
Status
4
49