[D-6-5] Trial Run - Yamaha YP250A 1999 Supplementary Service Manual

ON
Main
OFF
switch
ON
2.0 0.5
ABS 3.0
se- se-
seconds
warning light
conds conds
ANTI-LOCK BRAKE SYSTEM (ABS)
Flashing
0.5 0.5 0.5
se- se- se-
conds conds conds
7. Turn the main switch on again.
Check that the ABS warning light goes on for 2
seconds, then goes out for 3 seconds and
starts flashing.
8. Turn the main switch off.
9. Disconnect the test coupler adapter from the
test connector, and install the protective cap
with the test coupler adapter. Deleting the mal-
function code is now finished.
NOTE:
Do not forget to install the protective cap.
CAUTION:
Since the ECU remains in the memory until the
malfunction code is deleted, always delete the
malfunction code when the service work is fin-
ished.

[D-6-5] TRIAL RUN

After all checks and services are completed, al-
ways ensure the scooter has no problems by per-
forming the trial running at a speed of faster than
10 km/h.
83
CHAS