Desktop Installation; Mounting An External Power Supply In A Rack - Brocade Communications Systems ICX 6430 Hardware Installation Manual

Installing the device

Desktop installation

Complete the following steps to install the ICX 6400-EPS1500 on a desktop or other flat surface.
1. Attach the four adhesive feet to the bottom of the external power supply.
FIGURE 43 Attaching the adhesive feet to the ICX 6400-EPS1500
2. Set the external power supply on a flat surface near an AC power source, making sure there is at least 5.08 cm (2 in.) of space
on all sides for proper airflow.

Mounting an external power supply in a rack

DANGER
Make sure the rack housing the device is adequately secured to prevent it from becoming unstable or falling over.
Complete the following steps to install an external power supply in a rack.
1. Remove the rack mounting kit from the shipping carton. The kit contains two L-shaped mounting brackets, six sink-head
mounting screws, four rack-mounting screws, and four cage nuts.
56
Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
Part Number: 53-1003617-03