Removing the rear wheel
Lift the front wheel into the fork, position it, and insert the wheel spindle.
The brake linings are positioned.
Mount and tighten screw
Screw, front wheel spindle
Operate the hand brake lever several times until the brake linings are lying correctly
against on the brake disc.
Remove the motorcycle from the lift stand. (
Pull the front wheel brake and push down hard on the fork several times to align the
Screw, fork stub
Raise the motorcycle with the lift stand. (
Press the brake caliper onto the brake disc by hand in order to push back the brake
Make sure when pushing back the brake piston that you do not press the
brake caliper against the spokes.
Remove chain adjuster
wheel to be pushed forward.
Push the rear wheel forward as far as possible. Remove the chain from the rear
Protect the motorcycle and its attachments against damage by covering
Holding the rear wheel, withdraw the wheel spindle. Take the rear wheel out of the
Do not operate the foot brake when the rear wheel is removed.
Always lay the wheel down in such a way that the brake disc is not damaged.
. Withdraw wheel spindle
45 Nm (33.2 lbf ft)
15 Nm (11.1 lbf ft)
only enough to allow the rear