Message on the speedometer
Setting the speedometer
Overview of indicator lamps
Activating the speedometer
The speedometer is activated when one of the buttons is pressed or an impulse comes
from the wheel speed sensor.
The motorcycle is stationary.
Press both buttons for 3–5 seconds.
The Setup menu is displayed. The UNIT display flashes.
Press one of the buttons to select UNIT for the speed in kilometers KM/H or miles
Wait for 5 seconds.
The speedometer changes to the next menu item. The
Press one of the buttons to select the 24h or 12h display of the clock.
Battery voltage of the speedometer – Battery voltage of the speedometer
is too low. Change the battery.
Service – Service is due. Contact an authorized Husqvarna workshop.