SERVICE WORK ON THE CHASSIS
Checking the rubber grip
Additionally securing the rubber grip
Adjusting the basic position of the clutch lever
Check the throttle cable routing.
The throttle cable must be routed to the carburetor on the left side of the
upper frame tube behind the handlebars.
If the throttle cable is not routed as specified:
Install the fuel tank.
Mount the seat. (
Check the rubber grips on the handlebar for damage, wear, and looseness.
If a rubber grip is damaged, worn, or loose:
Change and secure the rubber grip.
Rubber grip adhesive (00062030051) (
Check the rubber grip. (
Secure the rubber grip at two points using the securing wire.
Securing wire (54812016000)
Wire twister forceps (U6907854)
The twisted wire ends face away from the hands and are bent toward the rubber
Adjust the basic setting of the clutch lever to your hand size by turning adjusting
Correct the throttle cable routing.