6
CONTROLS
6.6
Horn button (TE EU/AUS)
6.7
Light switch (TE EU/AUS)
6.8
Light switch (TE USA)
6.9
Turn signal switch (TE EU/AUS)
6.10
Emergency OFF switch (TE AUS)
The horn button
Possible states
•
Horn button
•
Horn button
C00546-11
The light switch
Possible states
C00546-12
The light switch
Possible states
Light off – Light switch is pressed in up to the stop. In this position, the light is
•
switched off.
Light on – Light switch is pulled out to the stop. In this position, the low beam and
•
tail light are switched on.
B01648-10
The turn signal switch
Possible states
C00548-10
The emergency OFF switch
Possible states
L01619-11
is fitted on the left side of the handlebar.
1
in neutral position
pressed – The horn is operated in this position.
is fitted on the left side of the handlebar.
1
Light off – The light switch is turned to the right. In this position, the light
is switched off.
Low beam on – The light switch is in the central position. In this position,
the low beam and tail light are switched on.
High beam on – The light switch is turned to the left. In this position, the
high beam and the tail light are switched on.
is on the left of the speedometer.
1
is fitted on the left side of the handlebar.
1
Turn signal light off – The turn signal switch is in the central position.
Left turn signal on – The turn signal switch is turned to the left.
Right turn signal on – The turn signal switch is turned to the right.
is fitted on the right side of the handlebar.
1
Ignition off – In this position, the ignition circuit is interrupted, a running
engine stops, and a non-running engine will not start.
Ignition on – In this position, the ignition circuit is closed, and the engine
can be started.
15