Removing The Right Side Cover; Installing The Right Side Cover; Removing The Fuel Tank - Husqvarna TE 125 EU Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.31

Removing the right side cover

12.32

Installing the right side cover

12.33

Removing the fuel tank

Danger
Fire hazard Fuel is highly flammable.
–
Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no fuel
is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.
–
The fuel in the fuel tank expands when warm and may emerge if overfilled. Follow the instructions on refueling.
Main work
–
Remove screws
–
Pull the glass fiber yarn filling
–
Clean the parts that are to be reinstalled.
–
Mount the new glass fiber yarn filling
–
Slide outer tube
–
Mount and tighten all screws
B00486-10
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
–
Remove screw
–
Pull off the side cover in area
L01635-10
–
Position the side cover and engage in area
–
Mount and tighten screw
Guideline
Remaining screws, chassis
L01635-10
x
. Pull out inner tube .
1 2
from the inner tube.
3
on the inner tube.
3
over the inner tube with the new glass fiber yarn filling.
4
.
1
p. 54)
p. 55)
.
1
sideways and remove it toward the rear.
A
.
1
.
A
M6 10 Nm (7.4 lbf ft)
55