Download Print this page

Installing The Fuel Tank - Husqvarna TE 125 EU Owner's Manual

Husqvarna motorcycles 2014 owner's manual
Hide thumbs

Advertisement

12
SERVICE WORK ON THE CHASSIS
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
Fuel must not come into contact with the skin, eyes, or clothing. Do not breathe in the fuel vapors. If contact occurs with the
eyes, rinse with water immediately and contact a physician. Immediately clean contaminated areas on the skin with soap and
water. If fuel is swallowed, contact a physician immediately. Change clothing that is contaminated with fuel. Store fuel prop-
erly in a suitable canister and keep away from children.
12.34

Installing the fuel tank

Danger
Fire hazard Fuel is highly flammable.
Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no fuel
is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.
The fuel in the fuel tank expands when warm and may emerge if overfilled. Follow the instructions on refueling.
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
Fuel must not come into contact with the skin, eyes, or clothing. Do not breathe in the fuel vapors. If contact occurs with the
eyes, rinse with water immediately and contact a physician. Immediately clean contaminated areas on the skin with soap and
water. If fuel is swallowed, contact a physician immediately. Change clothing that is contaminated with fuel.
Preparatory work
Remove the seat. (
Main work
Turn tap handle
Pull off the fuel hose.
Info
Remaining fuel may run out of the fuel hose.
(TE EU/AUS)
Detach the connector for the horn.
Remove screws
B01808-12
(TE USA)
Remove screws
Remove screw
Remove the tube from the fuel tank vent line.
L01637-11
Pull both spoilers sideways off of the radiator bracket and take off the fuel tank
toward the top.
B01810-01
x
Preparatory work
Remove the seat. (
Remove the fuel tank.
Check the throttle cable routing. (
p. 51)
on the fuel tap to position OFF. (Figure L01603-10
1
with the horn and collar bushings.
1
with the collar bushings.
1
with the rubber bushing.
2
p. 51)
(
p. 55)
x
p. 61)
56
p. 17)

Hide quick links:

Advertisement

loading