Checking The Chain For Dirt; Cleaning The Chain - Husqvarna TE 125 EU Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.35

Checking the chain for dirt

12.36

Cleaning the chain

Warning
Danger of accidents Oil or grease on the tires reduces their grip.
–
Remove oil and grease with a suitable cleaning material.
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Main work
–
Position the fuel tank and fit the two spoilers to the sides of the radiator bracket.
–
Make sure that no cables are trapped or damaged.
L01671-10
–
Mount the fuel tank vent hose.
–
Mount and tighten screw
Guideline
Remaining screws, chassis
L01637-10
(TE EU/AUS)
–
Mount and tighten screws
Guideline
Remaining screws, chassis
(TE USA)
–
Mount and tighten screws
Guideline
Remaining screws, chassis
B01808-10
–
Connect the fuel hose
Finishing work
–
Mount the seat. (
–
Check the chain for heavy soiling.
» If the chain is very dirty:
–
Clean the chain. (
400678-01
with the rubber bushing.
1
M6
with the horn and collar bushings.
2
M6
with the collar bushings.
2
M6
p. 51)
p. 57)
57
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)