Download Print this page

Loosening The Fork Protection; Positioning The Fork Protection; Removing The Fork Legs - Husqvarna TE 125 EU Owner's Manual

Husqvarna motorcycles 2014 owner's manual
Hide thumbs

Advertisement

12
SERVICE WORK ON THE CHASSIS
12.5

Loosening the fork protection

12.6

Positioning the fork protection

12.7

Removing the fork legs

Warning
Danger of accidents Reduced braking efficiency due to oil or grease on
the brake discs.
Clean and oil the dust boots and inner fork tube of both fork legs.
Press the dust boots back into their normal position.
Remove excess oil.
Finishing work
Position the fork protection. (
Remove the motorcycle from the lift stand. (
Remove screws
Remove screws
Remove the screws on the right fork leg. Push the fork protection downwards.
C00564-10
Position the fork protection on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
Position the brake line and clamp. Mount and tighten screws
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis
C00564-11
x
Preparatory work
Switch off all power consumers and switch off the engine.
Remove the headlight mask with the headlight. (
Raise the motorcycle with the lift stand. (
Remove the front wheel.
Main work
Remove screws
Remove cable binder
Remove screws
Hang the brake caliper and the brake line loosely to the side.
C00577-10
Always keep the brake discs free of oil and grease, and clean them with
brake cleaner when necessary.
p. 44)
and take off the clamp.
1
on the left fork leg. Push the fork protection downwards.
2
(
p. 75)
x
and take off the clamp.
1
.
2
and take off the brake caliper.
3
p. 43)
M6
10 Nm (7.4 lbf ft)
.
2
M6
10 Nm (7.4 lbf ft)
p. 82)
p. 43)
44
.
1

Hide quick links:

Advertisement

loading