Adjusting The Headlight Range; Changing The Speedometer Battery - Husqvarna TE 125 EU Owner's Manual

15 ELECTRICAL SYSTEM
15.10

Adjusting the headlight range

15.11

Changing the speedometer battery

Preparatory work
–
Check the headlight setting. (
Main work
–
Turn adjusting screw
Guideline
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with a rider (instructions on how to apply the mark: Checking the head-
light setting).
Info
Turn clockwise to reduce the headlight range; turn counterclockwise to
B01783-10
increase the headlight range.
A change in weight on the vehicle may require a correction of the headlight
range.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
–
Pull the speedometer upward out of the holder.
B01786-10
–
Using a coin, turn protection cap
–
Remove speedometer battery
–
Insert the new battery with the label facing outward.
Speedometer battery (CR 2032)
–
Check the O-ring of the protection cap for correct seating.
B01644-11
–
Position protection cap
–
Press any button on the speedometer.
The speedometer is activated.
–
Position the speedometer in the holder.
–
Mount and tighten the screws with washers.
B01645-11
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Set the speedometer. (
p. 84)
to adjust the headlight range.
1
.
1
all the way counterclockwise and remove it.
2
.
3
and turn all the way clockwise using a coin.
2
p. 84)
p. 21)
p. 82)
p. 83)
85