12
SERVICE WORK ON THE CHASSIS
12.46
Checking/rectifying the fluid level of the hydraulic clutch
Info
The fluid level rises with increased wear of the clutch facing discs.
(TE 250/300)
–
Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screw
C00530-11
(TE 125)
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
–
Check the fluid level.
Fluid level below container rim
»
If the fluid level does not meet specifications:
–
L01702-10
–
Position the cover with the membrane. Mount and tighten the screws.
(TE 250/300)
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
–
Check the fluid level.
Fluid level below container rim
»
If the fluid level does not meet specifications:
–
B01538-10
–
Position the cover with the membrane. Mount and tighten the screws.
Info
Turn the adjusting screw counterclockwise to increase the distance
between the clutch lever and the handlebar.
Turn the adjusting screw clockwise to decrease the distance between the
clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
.
1
Info
Turn the adjusting screw counterclockwise to decrease the distance
between the clutch lever and the handlebar.
Turn the adjusting screw clockwise to increase the distance between the
clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
.
1
with membrane
2
Correct the fluid level of the hydraulic clutch.
Hydraulic oil (15) (
p. 119)
.
1
with membrane
2
Correct the fluid level of the hydraulic clutch.
Brake fluid DOT 4 / DOT 5.1 (
.
3
4 mm (0.16 in)
.
3
4 mm (0.16 in)
p. 119)
63