Debug Platform Cpu-Queues - Cisco WS-C3560E-24PD-E Command Reference Manual

Appendix B Catalyst 3560 Switch Debug Commands

debug platform cpu-queues

Use the debug platform cpu-queues privileged EXEC command to enable debugging of platform
central processing unit (CPU) receive queues. Use the no form of this command to disable debugging.
Syntax Description broadcast-q
cbt-to-spt-q
cpuhub-q
host-q
icmp-q
igmp-snooping-q
layer2-protocol-q
logging-q
remote-console-q
routing-protocol-q Display debug messages about packets received by the routing protocol queue.
rpffail-q
software-fwd-q
stp-q
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(19)EA1
Usage Guidelines The undebug platform cpu-queues command is the same as the no debug platform cpu-queues
command.
78-16405-05
debug platform cpu-queues {broadcast-q | cbt-to-spt-q | cpuhub-q | host-q | icmp-q |
igmp-snooping-q | layer2-protocol-q | logging-q | remote-console-q | routing-protocol-q |
rpffail-q | software-fwd-q | stp-q}
no debug platform cpu-queues {broadcast-q | cbt-to-spt-q | cpuhub-q | host-q | icmp-q |
igmp-snooping-q | layer2-protocol-q | logging-q | remote-console-q | routing-protocol-q |
rpffail-q | software-fwd-q | stp-q}
Display debug messages about packets received by the broadcast queue.
Display debug messages about packets received by the core-based tree to
shortest-path tree (cbt-to-spt) queue.
Display debug messages about packets received by the CPU heartbeat queue.
Display debug messages about packets received by the host queue.
Display debug messages about packets received by the Internet Control Message
Protocol (ICMP) queue.
Display debug messages about packets received by the Internet Group
Management Protocol (IGMP)-snooping queue.
Display debug messages about packets received by the Layer 2 protocol queue.
Display debug messages about packets received by the logging queue.
Display debug messages about packets received by the remote console queue.
Display debug messages about packets received by the reverse path forwarding
(RFP) failure queue.
Debug packets received by the software forwarding queue.
Debug packets received by the Spanning Tree Protocol (STP) queue.
Modification
This command was introduced.
debug platform cpu-queues
Catalyst 3560 Switch Command Reference
B-31