Debug Platform Cpu-Queues - Cisco Catalyst 2960 Command Reference Manual

debug platform cpu-queues

debug platform cpu-queues
Use the debug platform cpu-queues privileged EXEC command to enable debugging of platform
central processing unit (CPU) receive queues. Use the no form of this command to disable debugging.
Syntax Description broadcast-q
cbt-to-spt-q
cpuhub-q
host-q
icmp-q
igmp-snooping-q
layer2-protocol-q
logging-q
remote-console-q
software-fwd-q
stp-q
Though visible in the command-line help strings, the routing-protocol-Q and rpffail-q keywords are
Note
not supported.
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines
The undebug platform cpu-queues command is the same as the no debug platform cpu-queues
command.
Catalyst 2960 Switch Command Reference
B-26
debug platform cpu-queues {broadcast-q | cbt-to-spt-q | cpuhub-q | host-q | icmp-q |
igmp-snooping-q | layer2-protocol-q | logging-q | remote-console-q | software-fwd-q |
stp-q}
no debug platform cpu-queues {broadcast-q | cbt-to-spt-q | cpuhub-q | host-q | icmp-q |
igmp-snooping-q | layer2-protocol-q | logging-q | remote-console-q | software-fwd-q |
stp-q}
Display debug messages about packets received by the broadcast queue.
Display debug messages about packets received by the core-based tree to
shortest-path tree (cbt-to-spt) queue.
Display debug messages about packets received by the CPU heartbeat queue.
Display debug messages about packets received by the host queue.
Display debug messages about packets received by the Internet Control Message
Protocol (ICMP) queue.
Display debug messages about packets received by the Internet Group
Management Protocol (IGMP)-snooping queue.
Display debug messages about packets received by the Layer 2 protocol queue.
Display debug messages about packets received by the logging queue.
Display debug messages about packets received by the remote console queue.
Debug packets received by the software forwarding queue.
Debug packets received by the Spanning Tree Protocol (STP) queue.
Modification
This command was introduced.
Appendix B Catalyst 2960 Switch Debug Commands
OL-8604-04