Hyundai N700E Instruction Manual page 90

N700E INSTRUCTION MANUAL
Run Signal [RUN]
When the [RUN] signal is selected as an intelligent output terminal, the inverter outputs a signal on that
terminal when it is in the Run Mode.
The output logic is active low, and is the open collector type (switch to ground)
Option Terminal
Code Symbol
0 RUN
Valid for inputs:
Required setting
Notes:
• The inverter outputs the [RUN] signal whenever
the inverter output exceeds the start frequency.
The start frequency is the initial inverter output
frequency when it turns on.
Input
Function Name
State
ON
Run signal
OFF
C13,C14,C15
0
Description
when inverter is in Run Mode
when inverter Stop Mode
5-23