Hyundai N700E Instruction Manual page 80

N700E INSTRUCTION MANUAL
Software Lock [SFT]
• When the terminal [SFT] is turned on, the data of all the parameters and functions except the
output frequency is locked (prohibited from editing).
When the data is locked, the keypad keys cannot edit inverter parameters.
To edit parameters again, turn off the [SFT] terminal input.
Option Terminal
Code Symbol
12 SFT
Valid for inputs:
Required setting
Notes:
• When the [SFT] terminal is turned on, only the
output frequency can be changed.
• Software lock can be made possible also
for the output frequency by b09.
• Software lock by the operator is also possible
without [SFT] terminal being used (b09)
Input
Function Name
State
ON
Software Lock
OFF
C01,C02,C03,C04,C05,C06
B09 (excluded from lock)
Description
The keypad and remote programming devices are
prevented from changing parameters
The parameters may be edited and stored
Example:
CM1 6 5
5-13
SFT FW
SW3 SW1
4 3 2 1 P24