Cisco TelePresence System Codec C90
Contents
Introduction
Introduction
What's new in this version
This section provides an overview of the new and changed
advanced settings and new features in the TC5.0 software
version.
Software release notes
For a complete overview of the news and changes, we
recommend reading the Software Release Notes (TC5).
Go to:
http://www.cisco.com/en/US/products/ps11422/
tsd_products_support_series_home.html
Software download
For software download go to:
http://www.cisco.com/cisco/
software/navigator.html
D14641.06
Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API
xConfiguration
New features and improvements
Support for native CUCM registration
With TC5 the video systems are able to register to the Cisco
Unified Communications Manager (CUCM) version 8.6 as a
native Cisco device. Supported features are:
•
Basic telephony features like call, hold/resume, transfer
•
CUCM provisioning
•
CUCM phonebook
•
Software upgrade
Encrypted calls are not supported.
Support for Cisco TelePresence Multipoint Switch (CTMS)
In TC5 interoperability with CTMS version 1.8 is achieved.
The following features are supported:
•
Multipoint conferences hosted on CTMS
•
Unrestricted 720p/1080p conferences (unrestricted
1080p is not available when there is a CTS system in the
conference)
•
H.264 GDR (Gradual Decoder Refresh)
•
Legacy stream (CIF/360p) to WebEX and MXE
•
Informational Black Screen Codes
Encryption is not supported. CTMS calls must be SIP only.
Support for One Button To Push (OBTP) meetings
Both the Touch controller and the OSD (On Screen Display)
menu will display scheduled OBTP meetings from CTS-MAN
(version 1.8 or later) or TelePresence Management Suite
(TMS, version 13.1 or later). Supported features are:
•
A reminder for scheduled meetings will appear on screen.
Press one button to start the meeting
•
Press the Meetings button to see a list of all scheduled
meetings
•
WebEx indication
•
Meeting extension if the meeting is booked using CTS-
MAN
6
xCommand
xStatus
Web interface enhancements
New call application with support for:
•
Making calls and start/stop presentation
•
Selecting source for both main source and presentation
•
Volume control
•
Microphone mute
•
Local camera control including preset selection
•
Layout control
•
Diagnostics information
•
Web snapshots of any local source
Cisco Touch enhancements
The user interface has been changed:
•
Call rate button. If changed from default, the new call rate
is displayed on the button
•
Meetings button on the main menu
•
Possibility to enable/disable web snapshots when the
Touch controller is connected directly to the system/
codec (direct pairing).
•
Local camera control, including preset selection
New languages supported:
•
Finnish
•
French
•
German
•
Japanese
•
Russian
•
Simplified Chinese
•
Swedish
Other enhancements
•
Local presentation only mode (the presentation is only
displayed locally; it is not sent to the remote sites)
•
FIPS (The Federal Information Processing Standards)
mode is introduced to facilitate FIPS 140-2 certification
API Reference Guide
Appendices
www.cisco.com