Xstatus Sip Profile 1 Proxy [1] Address; Xstatus Sip Profile 1 Proxy [1] Status; Xstatus Sip Registration [1 - Cisco TelePresence System Codec C90 Reference Manual

Cisco TelePresence System Codec C90
Contents Introduction
xStatus SIP Registration [1..n] Status
Shows the status of the registration to the SIP Proxy Server.
Deregister: The system is in the process of de-registering to the SIP Proxy.
Failed: The system failed to register to the SIP Proxy.
Inactive: The system is not registered to any SIP Proxy.
Registered: The system is registered to the SIP Proxy.
Registering: The system is in the process of registering to the SIP Proxy.
Value space of the result returned:
<Deregister/Failed/Inactive/Registered/Registering>
Example:
xStatus SIP Registration 1 Status
*s SIP Registration 1 Status: Registered
** end
xStatus SIP Registration [1..n] Reason
Shows a message to explain the reason why the SIP registration failed.
Value space of the result returned:
<S: 0, 100>
Example:
xStatus SIP Registration 1 Reason
*s SIP Registration 1 Reason: "404 Not Found"
** end
xStatus SIP Registration [1..n] URI
Shows the URI used for registration to the SIP Proxy server.
Value space of the result returned:
<S: 0, 100>
Example:
xStatus SIP Registration 1 URI
*s SIP Registration 1 URI: "firstname.lastname@company.com"
** end
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration
xStatus SIP Registration [1..n] Authentication

xStatus SIP Profile 1 Proxy [1] Status

xStatus SIP Profile 1 Proxy [1] Address

147
xCommand
Shows which authentication mechanism is used when registering to the SIP Proxy Server.
Digest: Uses the Digest access authentication method, as specified by RFC 2069.
NTLM: Uses the NTLM athentication method, which is a Microsoft athentication protocol.
Off: No authentication mechanism is used.
Value space of the result returned:
<Digest/NTLM/Off>
Example:
xStatus SIP Registration 1 Authentication
*s SIP Registration 1 Authentication: Off
** end
Shows the status of the communication between the endpoint and the SIP Proxy server.
Active: The communication between the endpoint and the SIP Proxy is active.
DNSFailed: The attempt to establish communication to the DNS server failed.
Off: There is no communication between the endpoint and the SIP Proxy.
Timeout: The attempt to establish communication to the SIP Proxy timed out.
UnableTCP: The system is unable to use TCP as the transport method.
UnableTLS: The system is unable to use TLS as the transport method.
Unknown: The status of the communication is not known.
Value space of the result returned:
<Active/DNSFailed/Off/Timeout/UnableTCP/UnableTLS/Unknown>
Example:
xStatus SIP Profile 1 Proxy 1 Status
*s SIP Profile 1 Proxy 1 Status: Active
** end
Shows the address of the SIP Proxy that the system communicates with.
Value space of the result returned:
<S: 0, 255>
Example:
xStatus SIP Profile 1 Proxy 1 Address
*s SIP Profile 1 Proxy 1 Address: "192.0.2.50"
** end
API Reference Guide
xStatus xStatus Appendices
www.cisco.com