Download Print this page

Advertisement

Cisco TelePresence Video Systems
Table of contents
Introduction
GettinG started Guide
EX Series
MX200
Profile Series
Quick Set C20 / C20 Plus
Codec C Series
Software version TC4.2
JULY 2011
D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved.
User interfaces
Configuration
Appendices
1
www.cisco.com

Advertisement

   Related Manuals for Cisco MX200

   Summary of Contents for Cisco MX200

  • Page 1

    Configuration Appendices GettinG started Guide • EX Series • MX200 • Profile Series • Quick Set C20 / C20 Plus • Codec C Series Software version TC4.2 JULY 2011 D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 2: Table Of Contents

    Configuring H.323 and SIP ..........28 Setting the date, time and location ........29 Setting the system/codec password ......30 Setting the Administrator Settings menu password ..30 D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 3: Introduction

    Cisco TelePresence Systems GettinG started Guide Table of contents Introduction Introduction User interfaces Configuration Appendices Chapter 1 Introduction D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 4: Intellectual Property Rights

    DAMAGES. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners.

  • Page 5: User Documentation

    Software You can download the software for your product from the Cisco web site, go to: http://www.cisco.com/cisco/software/navigator.html D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 6: User Interfaces

    Cisco TelePresence Systems GettinG started Guide Table of contents Introduction User interfaces User interfaces Configuration Appendices Chapter 2 User interfaces D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 7: User Interfaces

    Touch controller Remote control and on-screen menu Web interface D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 8: How To Use The Touch Controller

    Tap the touch screen to wake Tap a button to Scroll in lists up the system, if needed. activate its function. as outlined. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 9: How To Use The Remote Control And On-screen Menu

    On‑screen menu system appendix. ADMINISTRATOR SETTINGS Programmable softbuttons Connect to Cisco Callway IP settings Set menu password Pairing Advanced configuration D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 10

    Contacts marked with a Add another participant are from My contacts, the others are from the corporate phone book. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 11

    Press and hold Press the Home key to go – to mute an back to the Home menu. incoming call. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 12

    When you pick up the remote control and touch the rubber line sensors along the sides of the remote control, the system wakes up.. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 13: How To Use The Web Interface

    Select a this page different value. Click tasks can be save the change, performed. cancel to leave without saving. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 14: Configuration

    Cisco TelePresence Systems GettinG started Guide Table of contents Introduction User interfaces Configuration Configuration Appendices Chapter 3 Configuration D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 15: About User Roles, User Accounts And Passwords

    IP address of your system. You also have to sign in (the product. default user name is admin with no password set). D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 16: Using The Touch Controller For System Configuration

    If the system has just been switched on, wait a few minutes to allow the system to start up. If in doubt, read the Installation guide for your product. Touch controller D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 17: Configuring Ip

    Please refer to the Administrator Guide for your product for details about all settings. On: The IP parameters, like the DNS and NTP server addresses, will be obtained automatically from the network. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 18: Configuring H.323 And Sip

    If you successfully registered to a SIP server the Status will show Registered in the SIP section. 9. Tap Exit to return to the home menu. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 19: Setting Date, Time And Location

    NTP server address. Off: You must set the time manually. The time will not be updated automatically. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 20: Setting The System/codec Password

    (*). 3. Select Save to save the changes, or Cancel to leave without saving. 4. Press Home to exit. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 21: Using The Remote Control And On-screen Menu For System Configuration

    If in doubt, see the Installation guide for your product. Remote control and on-screen menu D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 22: Configuring Ip

    Please refer to the Administrator Guide for your product for details about all settings. On: The IP parameters, like the DNS and NTP server addresses, will be obtained automatically from the network. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 23: Configuring H.323 And Sip

    Home to exit. Please check the Administrator guide for your product if you want to change the other SIP settings. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 24: Setting Date, Time And Location

    NTP server address. Off: You must set the time manually. The time will not be updated automatically. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 25: Setting The System/codec Password

    The password format is a string with 0–64 characters. 4. Click Change password. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 26: Using The Web Interface For System Configuration

    If the system has just been switched on, wait a few minutes to allow the system to start up. The web interface D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 27: Configuring Ip

    Please refer to the Administrator Guide for your product for details about all settings. On: The IP parameters, like the DNS and NTP server addresses, will be obtained automatically from the network. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 28: Configuring H.323 And Sip

    SIP section. Please check the Administrator guide for your product if you want to change the other SIP settings. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 29: Setting The Date, Time And Location

    NTP server address. Off: You must set the time manually. The time will not be updated automatically. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 30: Setting The System/codec Password

    (*). 3. Select Save to save the changes, or Cancel to leave without saving. 4. Press Home to exit. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 31: Appendices

    Cisco TelePresence Systems GettinG started Guide Table of contents Introduction User interfaces Configuration Appendices Appendices Appendices D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 32: The Settings Menu On The Touch Controller

    Configure the SIP settings. SIP Settings • Provisioning: Start the provisioning wizard. Provisioning • Multiway: Insert the address of the Multiway server. Multiway D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 33: The On-screen Menu System

    Set menu password: Change the menu password. • Pairing: Change the pairing behavior. Advanced configuration • Advanced configuration: Configure the system settings. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 34: The Advanced Configuration Page On The Web Interface

    Time: Date and time settings. • Video: Settings for video sources and monitors, and video display set‑ up and layout. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 35: User Documentation On The Cisco Web Site

    Release and General Information | Licensing Information Video conferencing room guidelines: Design | Design Guides NOTE: All products do not have all types of user documentation. D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com...

Comments to this Manuals

Symbols: 0
Latest comments: