Cisco Telepresence Remote Control - Cisco TelePresence System Codec C90 Reference Manual

Cisco TelePresence System Codec C90
Contents Introduction

Cisco TelePresence Remote Control

Microphone: Press the key to toggle the microphones on/off.
Volume: Press the + or – on the
Mute: Press the – on the
OK/Select: Press the key to confirm your choice or selection.
Phone book: Press the key to display the local Phone
Home: Press the key to key to show the menu on screen.
INITIATE A CALL: Select a name from the Phone book or enter
the name, number or URI and press the Call key to initiate the
SHORTCUT TO RECENT CALLS: Use the Call key as a shortcut
to Recent Calls when the Call menu is not visible.
Clear: Press the key to remove characters in a text field.
Grab the remote control and make sure your hand
touches the rubber line sensors going along both
sides of the remote control.
or: Touch any key on the remote control.
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API
Function keys:
functions. Each key reflects a soft key on screen.
key to adjust the codec
volume.
key to mute the volume
during an incoming call.
book.
Call: Using the key:
call.
Waking up the system
xConfiguration xCommand
Represents shortcuts and advanced
172
API Reference Guide
xStatus
Presentation: Press the key to show/hide a
presentation.
Zoom: Press the + or – on the key to zoom the camera
in and out.
Arrows:
•
Up/Down: Use the and arrow keys to navigate in
the menu.
•
Arrow Right: Press the arrow key to expand the
selected menu item or to move to the right in a text
field.
•
Arrow Left: Press the arrow key to go one step back
in the menu or to move to the left in a text field.
Layout: Press the key to display the Layout menu, then
select a view in the menu.
End call/Standby: Press the key to end a call, or when
idle, press and hold the key to go into standby mode.
Alphanumeric keypad: Use the keypad in the same way as
you would use a cellular phone.
•
0-9, a-z, period (.), @, space, *: Press a key repeatedly
to toggle between the options displayed on each key.
•
abc/123 #: Press the # key to toggle between touch
tones mode (long press), lower case characters and
numbers.
IR transmitter range (DIP switch setting)
The IR transmitter has a short and long range. Open the
battery cover and remove the batteries to set the DIP switch.
•
Short range (1 m): Move the DIP switch down.
•
Longer range: Move the DIP switch up.
Appendices Appendices
www.cisco.com