Cisco TelePresence System Codec C90
Contents
Introduction
User commands
By typing
?
or
help
after connecting to the Cisco TelePresence
System Codec C Series using RS-232/Telnet/SSH, the system
will list all supported root commands.
Bye
The bye command will close the command line interface.
Echo <on/off>
If echo is set to On the key inputs are displayed when entering
text in a command line interface.
If echo is set to Off no user input is displayed when entering
text in a command line interface.
The oher commands
The other user commands are described in the following
pages.
D14641.06
Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API
About the API
xConfiguration
?
- User Commands -
help
xconfiguration
xstatus
xevent
bye
log
OK
13
xCommand
xfeedback
xgetxml
xhistory
xpreferences
xcommand
systemtools
echo
API Reference Guide
xStatus
Appendices
www.cisco.com