Xcommand Experimental Takewebsnapshot; Xcommand Experimental Touchpaneladjustment - Cisco TelePresence System Codec C90 Reference Manual

Cisco TelePresence System Codec C90
Contents Introduction

xCommand Experimental TakeWebSnapshot

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Parameters:
SourceType: <localInput/localMain/localPresentation>
SourceId: <0..65534>
Example:
xCommand Experimental TakeWebSnapshot
*r TakeWebSnapshotResult (status=OK):
** end

xCommand Experimental TouchPanelAdjustment

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Parameters:
Type(r): <A/B>
Example:
xCommand Experimental TouchPanelAdjustment Type:A
*r TouchPanelAdjustmentResult (status=OK):
** end
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration
111
xCommand xCommand xStatus
API Reference Guide
Appendices
www.cisco.com