Xstatus Systemunit Hardware Mainboard Identifier; Xstatus Systemunit Hardware Mainboard Serialnumber; Xstatus Systemunit Hardware Module Compatibilitylevel; Xstatus Systemunit Hardware Module Identifier - Cisco TelePresence System Codec C90 Reference Manual

Cisco TelePresence System Codec C90
Contents Introduction

xStatus SystemUnit Hardware Module SerialNumber

Shows the serial number of the hardware module in the codec.
Value space of the result returned:
<S: 0, 100>
Example:
xStatus SystemUnit Hardware Module SerialNumber
*s SystemUnit Hardware Module SerialNumber: "F9AA99A00090"
** end

xStatus SystemUnit Hardware Module Identifier

Shows the revision of the hardware module in the codec.
Value space of the result returned:
<S: 0, 100>
Example:
xStatus SystemUnit Hardware Module Identifier
*s SystemUnit Hardware Module Identifier: "1"
** end

xStatus SystemUnit Hardware Module CompatibilityLevel

The Cisco TelePresence endpoints are using a NAND flash memory for general storage. The
endpoints running TC software will be manufactured with a new version of the flash memory.
Endpoints having the new version of the flash memory must run software TC4.2.1 or later. Some
previous TC software versions will be updated to support the new flash memory. Please check the
release note to find if the new version of the flash memory is supported. If your endpoint does not
have the CompatibilityLevel command it will not have the new flash memory installed.
The result returned when running the command will be either 0 or 1:
0 = The system does not have the new flash memory installed.
1 = The system has the new flash memory installed. If downgraded, it can only be downgraded to
previous TC software versions having support for the new version of the flash memory.
Value space of the result returned:
<1/0>
Example:
xstatus SystemUnit Hardware Module CompatibilityLevel
*s SystemUnit Hardware Module CompatibilityLevel: 0
** end
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration

xStatus SystemUnit Hardware MainBoard SerialNumber

xStatus SystemUnit Hardware MainBoard Identifier

xStatus SystemUnit Hardware VideoBoard SerialNumber

xStatus SystemUnit Hardware VideoBoard Identifier

152
xCommand
Shows the serial number of the main board in the codec.
Value space of the result returned:
<S: 0, 100>
Example:
xStatus SystemUnit Hardware MainBoard SerialNumber
*s SystemUnit Hardware MainBoard SerialNumber: "PH0999989"
** end
Shows the revision of the main board in the codec.
Value space of the result returned:
<S: 0, 100>
Example:
xStatus SystemUnit Hardware MainBoard Identifier
*s SystemUnit Hardware MainBoard Identifier: "101400-5 [06]"
** end
Shows the serial number of the video board in the codec.
Value space of the result returned:
<S: 0, 100>
Example:
xStatus SystemUnit Hardware VideoBoard SerialNumber
*s SystemUnit Hardware VideoBoard SerialNumber: "PH0999999"
** end
Shows the revision of the video board in the codec.
Value space of the result returned:
<S: 0, 100>
Example:
xStatus SystemUnit Hardware VideoBoard Identifier
*s SystemUnit Hardware VideoBoard Identifier: "101410-4 [07]"
** end
API Reference Guide
xStatus xStatus Appendices
www.cisco.com